Tag Archives: air compressor for sale

China wholesaler Permanent Magnet Variable Speed Screw Air Compressor (Ca Series 7.5-75kw) air compressor for sale

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2”	G1”		G1”	Rp1-1/2”	G2”	G2”
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between permanent magnet motor and ordinary asynchronous motor

Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are 1 power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.

Single Stage Compression

Oil cooled machine
Core Ndfeb magnetic steel, not only high temperature 180ºC, and energy efficiency level is higher than IE5. The heat loss is small and the efficiency is high under the same power.

Reliable intake valve system
Unique structural design, reliable intake valve system, do not have to worry about emergency shutdown and sudden power outage oil injection.
The oil and gas pipe of the whole machine are made of stainless steel material or imported hose, which is durable and not aging. It is sealed with thread and flat O-ring, easy to disassemble without leakage.

Rear exhaust design to suck instead of blow
Fans dissipate heat faster and make less noise. The traditional fan blows against the cooler, which has large resistance and loud noise. The back row is cooled, and the cooler is placed vertically to avoid the dust falling on the cooler from the top down, which will lead to slow blockage for a long time. This design avoids.

New oil-cooled motor
Mold forming, no welding points, no risk; Rotary oil passage circulation, small pressure difference; It’s a circular surface; Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.

Quality Upgrade Three Lightspots

Company Profile

HangZhou Hylein Energy & Environmental Technology Co., Ltd. is located in HangZhou, Pearl River Delta, known as China’s compressor production base, is a professional engaged in all kinds of screw air compressor, nitrogen machine, oxygen generator, vacuum pump, magnetic suspension compressor R & D, production and sales of manufacturing enterprises, with standard production assembly line, the introduction of Europe and North America mature and experienced technology, Focus on providing a full range of services for various industries.
We strictly follow the IS09001 quality system standards and related industry standards, and throughout the product design, procurement, manufacturing, inspection, sales and service of the entire process, we always adhere to the global procurement strategy to ensure the superior performance of each air compressor, we pay attention to the development of new products, the latest energy-saving products are providing quality services for the global industrial energy-saving cause.

Workshop Workshop

After-sales Service

Equipment support High efficiency and energy saving equipment since the start of normal commissioning, to ensure the normal operation of the equipment.

Service scheme Monthly, quarterly regular arrangement of personnel to the user phone or on-site equipment operation inspection, testing work, timely understanding of unit operation dynamics, effective answer to user equipment operation questions, and do the corresponding need to improve maintenance, maintenance, to ensure the long-term effective work of the equipment, while providing service reports every time.

We have a CHINAMFG theoretical knowledge, practical ability of strong service team and high-quality management team.

Our company will provide the fastest solution after receiving the notification of the failure of the user’s equipment, and arrange technicians to arrive at the scene as soon as necessary.

Warranty commitment High efficiency and energy saving equipment since the start of normal commissioning, the whole machine warranty for 1 year.

FAQ

Q1: What’s your delivery time?

O: It takes about 15 days, if there is any urgent order, please contact us.

Q2: How long is your air compressor warranty?

O: One year for the whole machine when the compressor leave our factory.

Q3: How about your after-sales service?

O:1. Provide customers with installation and commissioning online instructions.

2. Well-trained engineers available to overseas service

/* October 22, 2571 15:47:17 */(()=>{function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

Can air compressors be used for cleaning and blowing dust?

Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:

1. Cleaning Machinery and Equipment:

Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.

2. Dusting Surfaces:

Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.

3. Cleaning HVAC Systems:

Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.

4. Blowing Dust in Workshops:

In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.

5. Cleaning Electronics and Computer Equipment:

Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.

6. Industrial Cleaning Applications:

Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.

When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.

Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

air compressors
editor by lmc 2025-02-25

China Best Sales Factory Price 7.5kw~250kw Oil Free Water Lubrication Screw Air Compressor VSD for Industrial for Sale air compressor parts

Product Description

High Quality Screw Air compressor

Our company specialize in making various kinds of compressors, such as:Diaphragm compressor,Piston compressor, screw Air compressor,Nitrogen generator,Oxygen generator ,Gas cylinder,etc. All products can be customized according to your parameters and other requirements.

The CHINAMFG is a volume -type gas compression machine with a volume of work volume. The compression of the gas is achieved by changes in volume, and the change of the volume is to achieve a rotation movement in the case with a pair of rotor of the compressor.
Basic structure of the screw air compressor: In the body of the compressor, a pair of intertwined spiral rotors are parallel. Usually, there is a rotor with convex teeth outside the ball, which is called yang rotor or yang screw. The rotor with concave teeth in the festival is called a pussy rotor or yin screw. Generally, the yang rotor is connected to the original motivation. Axial force. The cylindrical roller bearing at both ends of the rotor enables the rotor to achieve radial positioning and is underneath the radial force in the compressor. At both ends of the compressor body, a certain shape and size of the pores are opened respectively. One is used for inhalation, which is called the air intake; the other is used for exhaust, called the exhaust port.
Customized is accepted , Pls provide the following information to us :
1.Working Pressure : ____ Bar
2.Rated Power : _____ KW/HP

Do you really choose the right Screw compressor?

About Power Saving

1. The annual electricity bill for purchasing a 37KW ordinary screw air compressor is 37KWx24hx365 days x1. 2 (electric fee) xO. 6 (loading) Power consumption is as high as 233.3366 million! Power saving after switching to permanent magnet variable frequency screw air compressor: 23. 3366×30% save electric fee 7.

45KW

55KW

75KW

90KW

144

Advantages of screw air compressor :
01.Advanced Medium Voltage Dual Stage Mainframe
1. Two-stage integrated design, oil mist spray cooling is used between stages, which reduces the temperature of the air, and the compression process is close to the most energy-saving isothermal compression. In principle, two-stage compression saves 5%-8% of energy compared to single-machine compression ;
2. It is suitable for the compression ratio matching of medium voltage, the leakage in the main engine is small, and the volumetric efficiency is high;
3. The bearing adopts imported heavy-duty bearing, which makes the force of the rotor better; the two-stage rotors are driven by helical gears respectively, so that each stage of the rotor has the best linear speed;
4. The third-generation asymmetric rotor technology, the tooth surface is processed by the German KAPP rotor grinder, creating a high-precision rotor, which is the first guarantee for the high efficiency and stability of the host.
02.High efficiency permanent magnet synchronous motor
1. IP54 protection grade, which is more stable and reliable than IP23 in harsh environment;
2. Low temperature rise design, higher efficiency, and extended the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4. It is made of rare earth permanent magnet materials, with large torque and small current during startup and operation;
5. With reasonable magnetic field design and magnetic density distribution, the working frequency range of energy-saving motors is wider and the operating noise is low;
6. Cooperating with the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, and is conducive
to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.
03. Special valve group
1. Intake valve: It adopts a special normally closed butterfly valve for medium voltage, with a non-return function, stable operation, high precision of air volume control, built-in noise reduction design, low cavitation noise and long service life;
2. Minimum pressure maintenance valve: special valve for medium voltage, high pressure resistance, high temperature resistance, accurate opening pressure, ensuring stable pressure in the barrel, ultra-fast return to seat, strong sealing, ensuring no backflow of gas, low pressure loss and high efficiency ;
3. Temperature control valve: The unit is equipped with a mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the oil supply of the unit at any time; by controlling the oil supply temperature of the main engine to ensure that the unit is in the best performance state;
4. Oil cut-off valve: special normally closed valve for medium voltage, controlled by the exhaust pressure of the machine head. When starting up, the valve opens quickly to ensure that the compressor is lubricated and warmed up as soon as possible; when shutting down, the valve prevents oil from being ejected from the intake end.
4.Advanced and reliable electric control system
1. Large-size color LCD touch screen, with good man-machine communication interface, touch screen with anti-mistouch and sleep function;
2. It adopts double frequency conversion system, which is more energy-saving. The frequency converter and the motor are perfectly matched, and the low frequency and high torque can output 180% of the rated torque;
3. According to the characteristics of medium voltage, a special program is developed, with multiple pressure sensors and multiple temperature sensors, which can comprehensively detect the operating status of the unit, and automatically control the machine status without special care;
4. Configure the Internet of Things, you can check the operating status of the unit on the mobile phone;
5. Independent air duct design, suitable for various working conditions.
5.Silent centrifugal fan
1. Adopt centrifugal fan, brand-new separate radial cooling fan design, with special cooler, better cooling effect and more energy saving;
2. Compared with axial flow fans, centrifugal fans have higher wind pressure and lower noise;
3. Using variable frequency fan control, the oil temperature is constant, prolonging the service life of lubricating oil;
4. Due to the high wind pressure, the cooler and the filter are less likely to be blocked.
6..High quality triple filter

1. The filtration area of the air filter exceeds 150% of the normal requirement, the inlet pressure loss is low, and the energy efficiency is good;2. The oil filter adopts a full-flow built-in pressure-bearing oil filter suitable for medium voltage conditions. The rated processing capacity of the oil filter is 1.3 times the circulating oil volume. The imported filter material and the design scheme of large margin are selected, which has high filtration precision and good durability.
3. The oil is divided into special customized oil, which is designed and developed for medium-pressure working conditions, with wide applicable pressure range, good separation effect and low operating pressure loss; imported glass fiber material is selected;
4. The design of the 3 filter positions is reasonable, the maintenance is convenient, and the downtime is reduced.
High quality and efficient coupling
1. The coupling is a torsional elastic coupling with a failure protection function, which can effectively damp and reduce the vibration and impact generated during operation;
2. The elastic body is only under pressure and can bear a larger load, and the drum-shaped teeth of the elastic body can avoid stress concentration.
Main Parameter

Technical parameters of oil-free water-lubricated permanent magnet variable frequency screw compressor
HYW-G	Working pressure		Exhaust volume		Power		Noise	Air outlet pipe diameter	Net weight	Dimensions(mm)
Water lubricated series	bar	psig	(m3/min)	cfm	kW	hp	dB		kg	Length	Width	Height
HYWV-7G	7	102	0.7-1.2	24.7-42.4	7.5	10	58±3	G1″	500	1135	800	1000
	8	116	0.6-1.1	21.2-38.8	7.5	10	58±3	G1″	500	1135	800	1000
	10	145	0.5-0.9	17.7-31.8	7.5	10	58±3	G1″	500	1135	800	1000
HYWV-11G	7	102	1.0-1.6	35.3-56.5	11	15	58±3	G1″	500	1135	800	1000
	8	116	0.9-1.5	31.8-53	11	15	58±3	G1″	500	1135	800	1000
	10	145	0.7-1.3	24.7-45.9	11	15	58±3	G1″	500	1135	800	1000
HYWV-15G	7	102	1.1-2	38.8-71	15	20	60±3	G1″	550	1400	1000	1200
	8	116	1-1.9	35.4-67.3	15	20	60±3	G1″	550	1400	1000	1200
	10	145	/	/	15	20	60±3	G1″	550	1400	1000	1200
HYWV-15G	7	102	/	/	15	20	60±3	G1″	550	1170	900	1100
	8	116	/	/	15	20	60±3	G1″	550	1170	900	1100
	10	145	0.9-1.6	31.8-56.6	15	20	60±3	G1″	550	1170	900	1100
HYWV-18.5G	7	102	1.8-3.1	63.6-109.5	18.5	25	61 ±3	G1″	600	1400	1000	1200
	8	116	1.6-2.8	56.5-98.9	18.5	25	61 ±3	G1″	600	1400	1000	1200
	10	145	1.5-2.5	53-88.3	18.5	25	61±3	G1″	600	1400	1000	1200
HYWV-22G	7	102	2.2-3.7	77.7-130.7	22	30	61 ±3	G1″	655	1400	1000	1200
	8	116	2.0-3.4	70.6-120.1	22	30	61 ±3	G1″	655	1400	1000	1200
	10	145	1.8-3.0	63.6-105.9	22	30	61 ±3	G1″	655	1400	1000	1200
HYWV-30G	7	102	3.1-5.2	109.5-183.6	30	40	64±3	G11/2″	1150	1920	1170	1320
	8	116	2.8-4.7	98.9-166	30	40	64±3	G11/2″	1150	1920	1170	1320
	10	145	2.5-4.3	88.3-151.9	30	40	64±3	G11/2″	1150	1920	1170	1320
HYWV-37G	7	102	3.6-6.1	127.1-215.4	37	50	64±3	G11/2″	1200	1920	1170	1320
	8	116	3.3-5.6	116.5-197.8	37	50	64±3	G11/2″	1200	1920	1170	1320
	10	145	3.0-5.0	105.9-176.6	37	50	64±3	G11/2″	1200	1920	1170	1320
HYWV-45G	7	102	4.5-7.5	158.9-264.9	45	60	66±3	G11/2″	1320	1920	1170	1320
	8	116	4.0-6.8	141.3-240.1	45	60	66±3	G11/2″	1320	1920	1170	1320
	10	145	3.6-6.0	127.1-211.9	45	60	66±3	G11/2″	1320	1920	1170	1320
HYWV-55G	7	102	6.0-10.0	211.9-353.1	55	75	66±3	DN50	1520	1930	1320	1535
	8	116	5.4-9.0	191-317.8	55	75	66±3	DN50	1520	1930	1320	1535
	10	145	4.6-7.8	162.4-275.5	55	75	66±3	DN50	1520	1930	1320	1535
HYWV-75G	7	102	7.8-13.0	275.5-459.1	75	100	70±3	DN50	1620	1930	1320	1535
	8	116	7.2-12.0	254.3-423.8	75	100	70±3	DN50	1620	1930	1320	1535
	10	145	6.0-10.0	211.9-353.1	75	100	70±3	DN50	1620	1930	1320	1535
HYWV-90G	7	102	9.3-15.5	328.4-547.4	90	120	70±3	DN50	1800	1930	1320	1535
	8	116	8.4-14.0	296.6-494.4	90	120	70±3	DN50	1800	1930	1320	1535
	10	145	7.5-12.5	264.9-414	90	120	70±3	DN50	1800	1930	1320	1535
HYWV-110G	7	102	12.0-20.0	423.8-706.3	110	150	72±3	DN80	3100	2300	1600	1750
	8	116	10.8-18.0	381.4-635.7	110	150	72±3	DN80	3100	2300	1600	1750
	10	145	9.6-16.0	339-565	110	150	72±3	DN80	3100	2300	1600	1750
HYWV-132G	7	102	15.0-25.0	527.9-882.9	132	175	72±3	DN80	3250	2300	1600	1750
	8	116	13.8-23.0	487.3-812.2	132	175	72±3	DN80	3250	2300	1600	1750
	10	145	12.0-20.0	423.8-706.3	132	175	72±3	DN80	3250	2300	1600	1750
HYWV-160G	7	102	16.2-27.0	572.1-953.5	160	215	72±3	DN100	4500	2860	1600	1800
	8	116	15.3-25.5	540.3-900.5	160	215	72±3	DN100	4500	2860	1600	1800
	10	145	14.4-24.0	508.5-847.6	160	215	72±3	DN100	4500	2860	1600	1800
HYWV-185G	7	102	18.0-30.0	635.7-1059.4	185	250	74±3	DN100	4500	2860	1600	1800
	8	116	16.8-28.0	593.3-988.8	185	250	74±3	DN100	4500	2860	1600	1800
	10	145	15.0-25.0	529.7-882.9	185	250	74±3	DN100	4500	2860	1600	1800
HYWV-200G	7	102	21.6-36.0	762.8-1271.3	200	270	74±3	DN125	4800	3150	1850	2050
	8	116	19.8-33.0	699.2-1165.4	200	270	74±3	DN125	4800	3150	1850	2050
	10	145	16.2-27.0	572.1-953.5	200	270	74±3	DN125	4800	3150	1850	2050
HYWV-250G	7	102	25.8-43.0	911.1-1518.5	250	350	74±3	DN125	5200	3150	1850	2050
	8	116	24.6-41.0	868.7-1447.9	250	350	74±3	DN125	5200	3150	1850	2050
	10	145	22.8-38.0	805.2-1342	250	350	74±3	DN125	5200	3150	1850	2050

Factory Show

Packing & Delivery

Workshop of natural gas compressor
Our products
Our Certificate : CE and ISO certification
Our exhibition for the gas compressor
Our Service for diaphragm compressor :
1.Service time : 24*7 Hours
2.Customized Service
3.Perfect pre-sale,sale,after-sales service
4.FAT
5.Onsite commissioning Service
6.18 months warranty period

FAQ :
Q1.How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q2.What’s payment term?
A: T/T, L/C, D/P, Western Union, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q3 : How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.

/* October 22, 2571 15:47:17 */(()=>{function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

air compressors
editor by lmc 2025-02-24

China best 3.4kw 120L Portable silent Oil Free Mini Piston Air Compressor Hb120 for Sale manufacturer

Product Description

air compressor

What Are the Key Components of a Water-Lubrication System in Compressors?

A water-lubrication system in compressors typically consists of several key components that work together to provide lubrication and cooling to the compressor. Here’s a detailed explanation of the key components of a water-lubrication system in compressors:

Water Supply:

Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

Regular maintenance, inspection, and monitoring of the key components of the water-lubrication system are essential to ensure its proper functioning and to prevent any issues that could affect the performance and longevity of the compressor.

air compressor

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

When encountering common problems with water-lubrication systems, it is essential to follow a systematic troubleshooting approach. Here’s a detailed explanation of the steps involved in troubleshooting common issues with water-lubrication systems:

Step 1: Identify the Problem:

The first step is to identify the specific problem or symptom that is affecting the water-lubrication system. Common problems may include inadequate lubrication, water leaks, abnormal noises, or reduced system performance. Understanding the specific issue will help in determining the appropriate troubleshooting steps.

Step 2: Check Water Supply:

Verify that there is a proper water supply to the system. Ensure that the water source is connected and flowing adequately. Check for any obstructions or restrictions in the water lines that may be affecting the water flow to the lubrication system.

Step 3: Inspect Water Filters and Strainers:

Water filters and strainers are used in water-lubrication systems to remove debris and impurities from the water. Inspect these filters and strainers for clogs or blockages that may be hindering the water flow. Clean or replace the filters as necessary to ensure proper water filtration.

Step 4: Verify Water Pressure:

Check the water pressure within the system to ensure it falls within the recommended range. Low water pressure can result in inadequate lubrication, while high water pressure can cause leaks or damage to the system. Use a pressure gauge to measure the water pressure and adjust it if necessary according to the manufacturer’s guidelines.

Step 5: Examine Water-Lubrication Components:

Closely inspect the various components of the water-lubrication system, including the water pump, distribution lines, lubrication points, and seals. Look for signs of wear, damage, or misalignment that may be contributing to the problem. Tighten loose connections and replace any damaged or worn-out components as needed.

Step 6: Check for Air in the System:

Air trapped within the water-lubrication system can affect its performance. Bleed the system to remove any trapped air. Follow the manufacturer’s instructions for bleeding air from the system, which typically involves opening specific valves or vents until a steady flow of water is achieved.

Step 7: Inspect Cooling Mechanisms:

Water-lubrication systems often incorporate cooling mechanisms, such as heat exchangers or radiators, to dissipate excess heat. Inspect these cooling components for blockages, corrosion, or leaks that may be compromising their effectiveness. Clean or repair the cooling mechanisms as necessary to ensure proper heat dissipation.

Step 8: Consult Manufacturer Documentation:

If the troubleshooting steps above do not resolve the problem, refer to the manufacturer’s documentation, such as the user manual or technical specifications. These resources may provide specific troubleshooting guidelines, diagnostics, or additional maintenance procedures for the water-lubrication system.

Step 9: Seek Professional Assistance:

If the problem persists or if the troubleshooting steps are beyond your expertise, it is advisable to seek professional assistance. Contact the manufacturer’s technical support or consult a qualified technician with experience in water-lubrication systems. They can provide expert guidance and assistance in resolving complex issues.

By following these troubleshooting steps, you can effectively identify and address common problems encountered in water-lubrication systems, ensuring optimal performance and reliability.

air compressor

How Is Water Quality Crucial for the Performance of These Compressors?

Water quality plays a crucial role in the performance of water-lubricated air compressors. The quality of the water used for lubrication directly impacts the efficiency, reliability, and lifespan of these compressors. Here are the key reasons why water quality is essential for optimal compressor performance:

Lubrication effectiveness: Water serves as the lubricant in water-lubricated air compressors. The water forms a protective film between moving parts, reducing friction and wear. However, if the water contains impurities or contaminants, it can compromise the lubricating properties. Impurities like minerals, sediments, or dissolved solids can hinder the formation of an effective lubricating film, leading to increased friction and potential damage to the compressor components.
Corrosion prevention: Water with high mineral content, such as hard water, can promote corrosion within the compressor system. Minerals like calcium and magnesium can react with metal surfaces, leading to rust, scale formation, and degradation of internal components. Corrosion compromises the structural integrity of the compressor, reduces its efficiency, and may result in costly repairs or even premature failure.
Preventing blockages: Poor water quality can result in the accumulation of sediments, debris, or contaminants within the compressor system. These deposits can block water passages, filters, or valves, impeding the flow of water and affecting the overall performance of the compressor. Restricted water flow may lead to inadequate cooling, reduced lubrication, and compromised efficiency.
Preventing fouling and fouling-related issues: Fouling refers to the accumulation of organic or inorganic deposits on heat transfer surfaces, such as heat exchangers or radiators, within the compressor system. Poor water quality can contribute to fouling, reducing heat transfer efficiency and impairing the cooling capacity of the compressor. This can result in elevated operating temperatures, decreased performance, and potential damage to the compressor.
System cleanliness: Clean water is crucial for maintaining a clean and sanitary compressor system, especially in industries like food and beverage or medical applications. Contaminated water can introduce harmful bacteria, microorganisms, or particles into the compressor, posing a risk to product quality, safety, or patient well-being.

To ensure optimal performance and longevity of water-lubricated air compressors, it is important to monitor and maintain the quality of the water used for lubrication. Regular water analysis, proper filtration, and appropriate water treatment measures should be employed to remove impurities, control mineral content, and maintain the desired water quality. By ensuring clean and high-quality water, the compressor can operate efficiently, minimize the risk of component damage, and contribute to a reliable and safe compressed air system.

water_lubrication_air_compressor
editor by lmc 2025-02-24

China manufacturer Shengang Style Belt-Type Air Compressor air compressor for sale

Product Description

Belt Type Air Compressor
Model	SG-B3080T-225L
Electric Motor	5500W/7.5HP
Voltage	380V
Frequency	50Hz
Tank	45012003.5MM
Pressure	12.5BAR
Capacity	225L
Speed	2850RPM
Cylinder x Qty.	Ø80mm2pcs/65mm1pcs

Company Info.

Company Profile

	Business Type:	Manufacturer/Factory & Trading Company
	Main Products:	Direct Driven Air Compressor , Oil Free Series Compressor , Belt Driven Air Compressor , …
	Number of Employees:	100
	Year of Establishment:	2008-03-16
	Management System Certification:	ISO9001:2015
	OEM/ODM Availability:	Yes

Shengang, an expert in high-end machinery and equipment manufacturing, is located in HangZhou, ZHangZhoug. It is a large-scale manufacturing enterprise with a modern factory building of 50,000 square meters, a product research and development center and an international management system.

We focus on the R&D and manufacturing of various types of motors, air compressors and cleaning equipment. After more than 30 years of brand accumulation, Kamioka products have won a number of utility model patents and invention patents. The products sell well all over the world and are well received by the majority of supporting manufacturers. trust and support.

The company adheres to the purpose of “pursuing perfect quality and meeting customer needs”. The best products, the strictest quality control, the most reasonable prices and the most honest services are Kamiokande’s commitment to you. We sincerely welcome all Chinese and foreign partners to cooperate and work together for a CHINAMFG situation and move towards a better future!

Main Feature:
1. Standard stroke cylinder pump head, smooth operation and high production efficiency.
2. Thickened aluminum cast piston connecting rod, high strength, wear resistance, high temperature resistance and other characteristics.
3. Full copper wire motor, higher working efficiency, reliable operation and CHINAMFG structure.
4. Thickened hot-rolled steel plate gas storage tank, high strength and high pressure resistance thickness.
5. Accurate original pressure gauge, standard CHINAMFG display is accurate, safe and stable work.
6. Suction and exhaust valve, special valve cylinder, not afraid of high temperature.
7. Brand bearings, high quality bearings have long service life.
8. Thickened belt, the belt is tough and can mitigate impact, runs smoothly and has low operating noise.
9. Magnetic protector: Provide protective measures when the motor encounters overcurrent, overload, phase loss, short circuit, leakage, and imbalance.
10. Large capacity fuel tank design, low fuel consumption operation.

Certificates:

1.We have already got CE certificates for air compressor.

2.ISO9001 certificate for the factory.

We have invention patents for air compressors and high pressure washers.

We have air compressor energy efficiency labels.
Packing:

Outer packing is honey-comb carton with belts,inner packing is a transparent bag.We could accept customers special request,such as:print brand,specification,good’s picture.

Frequency Asked Question:

1.Are you the manufacturer or trading company?
We are the manufacturer.

2.Where is your factory?
It is located in HangZhou City,ZHangZhoug Province,China.

3.What’s the terms of trade?
FOB,CFR,CIF or EXW are all acceptable.

4.What’s the terms of payment?
T/T,L/C at sight or cash.

5.What’s the lead time?
About 30 days after receiving the deposit on our bank account.

6.Do you accept sample order?
Yes,we accept.

7.What about the cost of sample?
You have to pay the freight charge.But the cost of product could be refundable,if you will purchase 1×40’HQ container in the future.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	1 Year
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement
Cylinder Position:	Vertical

Samples:	US$ 303/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China manufacturer Shengang Style Belt-Type Air Compressor air compressor for sale
editor by CX 2024-02-23

China Best Sales Best Price Refrigerator Compressor CHINAMFG Digital Scroll Compressor, Air Condition Compressor air compressor for sale

Product Description

Best Price Refrigerator Compressor CHINAMFG Digital Scroll Compressor, Air Condition Compressor

Technical Specification

model	ZR72KCE-TFD
horse power	6
refrigerant	R407C
power source	380v-420V
Phrase	3
Color	Black
Connection	Braze
MOQ	1

Technical Specification for ZR Series

More models for choosing
220-240V; 50Hz, 1 Phase
ZR26KM-PFZ-522 ZR28KM-PFZ-582 ZR30KM-PFZ-522 ZR32KS-PFJ-620 ZR34KH-PFJ-522 ZR36KH-PFJ-522 ZR39KH-PFJ-522 ZR42K3-PFJ-522 ZR45K3-PFJ-522 ZR47K3-PFJ-522 ZR48K3-PFJ-522 ZR61KC-PFZ-522 ZR68KC-PFJ-522 ZR26KM-PFZ-522 ZR28KM-PFZ-582 ZR30KM-PFZ-522 ZR32KS-PFJ-620 ZR34KH-PFJ-522 ZR36KH-PFJ-522 ZR39KH-PFJ-522 ZR42K3-PFJ-522

ZR45K3-PFJ-522 ZR47K3-PFJ-522 ZR48K3-PFJ-522 ZR61KC-PFZ-522

208-230V; 60Hz, 1 Phase
ZR28KM-PFV ZR28KC-PFV ZR32K3-PFV ZR34KC-PFV ZR36KC-PFV ZR42KC-PFV ZR45KC-PFV ZR48KC-PFV ZR54KC-PFV ZR57KC-PFV ZR61KC-PFV ZR68KC-PFV

380-420V; 50Hz, 3 Phase
ZR22K3-TFD ZR24K3-TFD ZR26K3-TFD ZR28K3-TFD ZR32K3-TFD ZR34KH-TFD ZR36KH-TFD ZR39KH-TFD ZR42K3-TFD ZR45KC-TFD ZR47KC-TFD ZR48KC-TFD ZR54KE-TFD ZR54KC-TFD ZR57KE-TFD ZR57KC-TFD ZR61KE-TFD ZR61KC-TFD ZR68KC-TFD ZR72KC-TFD ZR81KC-TFD ZR84KC-TFD ZR94KC-TFD ZR108KC-TFD ZR125KC-TFD ZR144KC-TFD ZR160KC-TFD ZR190KC-TFD ZR250KC-TWD ZR310KC-TWD ZR380KC-TWD

200-230V/380V/460V; 60Hz, 3 Phase
ZR34K3-TF5 ZR34K3-TF7 ZR36K3-TF5 ZR45KC-TF5 ZR47KC-TF5 ZR47KC-TF7 ZR48KC-TF5 ZR48KC-TF7 ZR54KC-TFD ZR54KC-TF5 ZR54KC-TF7 ZR57KE-TF5 ZR57KC-TFD ZR57KC-TF5 ZR57KC-TF7 ZR61KS-TF5 ZR61KS-TF7 ZR61KC-TFD ZR61KC-TF5 ZR61KC-TF7 ZR68KC-TFD ZR68KC-TF5 ZR68KC-TF7 ZR72KC-TFD ZR72KC-TF5 ZR72KC-TF7 ZR81KC-TFD ZR81KC-TF5 ZR81KC-TF7 ZR84KC-TFD ZR84KC-TF5 ZR84KC-TF7 ZR94KC-TFD ZR94KC-TF5 ZR94KC-TF7 ZR108KC-TFD ZR108KC-TF5 ZR108KC-TF7 ZR125KC-TFD ZR125KC-TF5 ZR125KC-TF7 ZR144KC-TFD ZR144KC-TF5 ZR144KC-TF7 ZR160KC-TFD ZR160KC-TF7 ZR160KC-TW5
ZR190KC-TFD ZR190KC-TW5 ZR190KC-TW7 ZR250KC-TWD ZR250KC-TW5 ZR250KC-TW7 ZR310KC-TWD ZR310KC-TW7 ZR310KC-TWC ZR380KC-TWD ZR380KC-TW5 ZR380KC-TW7 ZR380KC-TWC ZR34K3-TF5-522 ZR34K3-TF7-522 ZR36K3-TF5-522

ZR45KC-TF5-522 ZR47KC-TF5-522 ZR47KC-TF7-522 ZR48KC-TF5-522 ZR54KC-TFD-522 ZR54KC-TFD-420 ZR54KC-TF7-522 ZR57KE-TF5-522 ZR57KC-TF5-522 ZR57KC-TF7-522 ZR61KS-TF5-522 ZR72KC-TF5-522 ZR72KC-TF7-522 ZR84KC-TF5-522

380V; 50Hz, 3 Phase
VR30KM-TFP VR32KS-TFP VR34KF-TFP VR48KS-TFP VR50KS-TFP VR52KS-TFP VR54KS-TFP VR57KF-TFP VR57KS-TFP VR61KF-TFP VR84KS-TFP VR94KS-TFP VR108KS-TFP VR125KS-TFP VR144KS-TFP VR160KS-TFP VR190KS-TFP

220V; 50Hz, 1 Phase
VR28KM-PFS VR30KM-PFS VR31KM-PFS VR34KF-PFS

380-420V; 50Hz, 3 Phase
ZR49KCE-TFD ZR54KCE-TFD ZR54KE-TFD ZR57KE-TFD ZR57KCE-TFD ZR61KE-TFD ZR61KCE-TFD ZR68KCE-TFD ZR72KCE-TFD ZR81KCE-TFD ZR84KCE-TFD ZR94KCE-TFD ZR108KCE-TFD ZR125KCE-TFD ZR144KCE-TFD ZR160KCE-TFD ZR190KCE-TFD ZR250KCE-TWD ZR310KCE-TWD ZR380KCE-TWD

208-230V; 60Hz, 1 Phase
ZR61KCE-PFV ZR68KCE-PFV

200-230V/380V/460V; 60Hz, 3 Phase R407C
ZR49KCE-TFD ZR49KCE-TF5 ZR49KCE-TF7 ZR54KSE-TF5 ZR54KCE-TFD ZR54KCE-TF5 ZR54KCE-TF7 ZR57KE-TF5 ZR57KCE-TFD ZR57KE-TF5 ZR61KSE-TF5 ZR61KSE-TF7 ZR61KCE-TFD ZR61KCE-TF5 ZR68KCE-TFD ZR68KCE-TF5 ZR68KCE-TF7 ZR72KCE-TFD
ZR72KCE-TF5 ZR72KCE-TF7 ZR81KCE-TFD ZR81KCE-TF5 ZR81KCE-TF7 ZR84KCE-TFD ZR84KCE-TF5 ZR84KCE-TF7 ZR94KCE-TFD ZR94KCE-TF5 ZR94KCE-TF7 ZR108KCE-TFD ZR108KEC-TF5 ZR108KCE-TF7 ZR125KCE-TFD ZR125KCE-TF5 ZR125KCE-TF7 ZR144KCE-TFD ZR144KCE-TF5 ZR144KCE-TF7 ZR160KCE-TFD ZR160KCE-TF7 ZR160KCE-TW5 ZR190KCE-TFD ZR190KCE-TW5 ZR190KCE-TW7 ZR250KCE-TWD ZR250KCE-TW5 ZR250KCE-TW7 ZR250KCE-TWC ZR310KCE-TWD ZR310KCE-TW7 ZR310KCE-TWC ZR380KCE-TWD ZR380KCE-TW5 ZR380KCE-TW7 ZR380KCE-TWC

380V; 50Hz, 3 Phase R407C
VR84KSE-TFP VR94KSE-TFP VR108KSE-TFP VR125KSE-TFP VR144KSE-TFP VR160KSE-TFP VR190KSE-TFP

208-230V; 60Hz, 1 Phase R407C
ZR61KCE-PFV ZR68KCE-PFV

380-420V; 50Hz, 3 Phase R134a

ZR49KCE-TFD ZR54KE-TFD ZR57KE-TFD ZR61KE-TFD ZR61KCE-TFD ZR68KCE-TFD ZR72KCE-TFD ZR81KCE-TFD
ZR84KCE-TFD ZR94KCE-TFD ZR108KCE-TFD ZR125KCE-TFD ZR144KCE-TFD ZR160KCE-TFD ZR190KCE-TFD
ZR250KCE-TWD ZR310KCE-TWD ZR380KCE-TWD

Refrigeration Compressors Scope
We are specialized in refrigeration compressors, including rotary, scroll, piston, screw, hermetic, semi-hermetic all kinds of brands refrigeration compressors.

1.Rotary compressor:Toshiba,Panasonic, CHINAMFG LG
2.Scroll compressor:Copeland,Dan-foss performer,hitachi,Dai-kin,Sanyo
3.Piston hermetic compressor:Tecumseh CHINAMFG MT,NTZ,MTZ series.
4.Semi-hermetic Reciprocating Compressor:Copeland,Bit-zer,Carrier
5.Screw compressor :Bit-zer ,Hitachi

Brand Range

Workshop

FAQ
1. What is the price for a refrigeration compressor?
The price is decided by Quantity.

2. How about samples?
Sample Lead Time: 5 working days
Sample Fee:
1). It’s free for all for a regular customer
2). For new customers, we will charge first, it is fully refundable when the order is confirmed.

3. How many days for shipping?
Shipping Methods and Lead Time:
By Express: 3-5 working days to your door (DHL, UPS, TNT, FedEx…)
By Air: 5-8 working days to your airport
By Sea: Pls advise your port of destination, the exact days will be confirmed by our forwarders, and the following lead time is for your reference. Europe and America (25 – 35 days), Asia (3-7 days), Australia ( 16-23 days)

4. What are the Terms of Payment?
Credit Card, T/T, L/C, Western Union; 30% T/T in advance, 70% before delivery.

5. Packaging & Shipping?
Pallet, wooden case or with outer carton, or as customers’ specific requirements.

6. Why choose your company?
We are focusing on all aspects of refrigeration compressor, high quality, and nice prices.
We strictly implement the rules according to the quality standard in every aspect from the purchase of raw material to the production process and outgoing of products.
Great service and Superior quality is provided all the time…
Packaging & Shipping Packing: Carton, wooden box, and pallet, or as customers’ requirements.
Shipping: By Express (DHL /UPS /TNT /FedEx /EMS), By Air, By Sea

Packaging and shipping

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	on-Line Service
Warranty:	6 Months
Installation Type:	Stationary Type
Lubrication Style:	Lubricated
Cylinder Position:	Vertical
Votage:	380-420V/3/50Hz

Customization:	Available \|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China Best Sales Best Price Refrigerator Compressor CHINAMFG Digital Scroll Compressor, Air Condition Compressor air compressor for sale
editor by CX 2024-02-20

China OEM Two Stage High Speed Energy- Saving Portable Mini Compression Screw Air Compressor air compressor for sale

Product Description

Two Stage High Speed Energy- Saving Portable Mini Compression Screw Air Compressor

Product Parameters

Name	Two Pole Air Compressor
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location	None
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Marketing Type	Other
Core Components	Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type	Air
Configuration	PORTABLE
Power Source	AC POWER
Type	PISTON
Lubrication Style	Oil-free
Mute	Yes
Voltage	220V
Application	Medical dental, bus, airbrush spray paint,industrial
OEM	Welcomed
Certification	CE, ISO9001

Model name

Delivery rate at 0 bar

Max. pressure

Nominal pressure

Noise level at nomal pressure

Motor input

Voltage

Frequency

XLOF1680-50L

260L/min

8 bar 116psi

6 bar 87 CHINAMFG

75 db(A)

1.8 KW

220 V

50 Hz

Product Display

Company Profile

Founded in 2002, ZHangZhoug CHINAMFG Electromechanical Co., Ltd. focus on manufacturing air compressors for more than 15 years. Our company is located in Daxi Pump Industrial Area, HangZhou City, ZHangZhoug, China. having more than 15000 square meter working area.We specialize in all kinds of piston air compressors, especially having advantages in our new advanced heavy-duty oil-free air compressors.

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q3: Can I get a sample to check the quality?
A: We are glad to offer you samples for test. Leave us message of the item you want or your requirements. We will reply you within 24 hours in working time.

Q4: I am buying from another supplier, but need better service, would you match or beat the price I am paying?
A: We always feel we provide the best service and competitive prices. We would be more than happy to personalize a competitive quote for you, just email us.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Parallel Arrangement
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What role do air dryers play in compressed air systems?

1. Moisture Removal:

2. Contaminant Removal:

3. Protection of Equipment and Processes:

4. Improved Productivity and Efficiency:

5. Compliance with Standards and Specifications:

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What maintenance is required for air compressors?

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

China OEM Two Stage High Speed Energy- Saving Portable Mini Compression Screw Air Compressor air compressor for sale
editor by CX 2024-02-17

China manufacturer Water Lubricant Silent Rotary Screw Type 132kw 200HP Air Cooling 116psi 7bar/8bar/10bar Air Compressor for Oxygen Plant/Textile Industry air compressor for sale

Product Description

Our Advantages

ZIQI Oil Free Water Lubricant Screw Air Compressor Advantages:

1. 100% oil-free , good reliability
There is no oil in the water-lubricated screw body, which will not cause oil pollution of the compressed air. It belongs to a
completely oil-free screw air compressor. Dry-type oil-free machine bearings, gearboxes, and intercoolers require oil to
participate in lubrication and sealing. The high temperature of the unit can easily cause oil leakage to pollute the compressed air. It is a semi-oil-free compressor.

2. Isothermal compression, high efficiency, no flammable, explosive, etc.
The operating temperature of the oil-free screw machine does not exceed 50ºC, and the gas does not expand to save energy by more than 15%. The exhaust temperature of the semi-oil-free screw machine is above 180ºC. The high temperature makes the bearing, screw, body, and sealing material have a very short service life and must be expensive. s material. The volatilization of lubricating oil at high temperatures can cause fires and explosions.

3. Power saving: water-lubricated compressor is 1 of the lower energy consumption of oil-free machines in the world.
ZIQI air dry oil-free air compressor 90KW, nameplate capacity 12.50m?/min (10bar), water-jet all oil-free air compressor 90KW, the actual measured air volume is 14.52m?/min (10bar), the displacement has increased by 16%, This means that users save 16% of electricity. According to the calculation based on running 24 hours a day and the electricity cost of 1.0 yuan/kWh, each unit can save 1.26 million yuan in electricity costs for 10 years.

4. The compression temperature is relatively low, the host has a long life, the maintenance cost is relatively low, and the
trouble-free operation cycle is long.The main engine of the water-jet all-oil-free compressor has a general warranty of 5 years and a design life of more than 25 years. Low maintenance costs are a reliable choice for formal enterprises to focus on energy management and reduce product costs.

5. Simple maintenance and no worries

It is as simple as a “water pump” to ensure no worries.

6.Dry
The water content in compressed air is low. All compressors produce 100% saturated water vapor. The pressure dew point of water-injected and oil-free compressed air is less than 40 degrees Celsius. Actually, it contains less water, and a lot of water in the air will be discharged. .

Motor	Air pressure			Air Flowing		Motor power		Dimension	Weight
Motor	mpa	bar	psi	m3/min	cfm	hp	kw	L(mm)W(mm)H(mm)	kgs
OF-11A	0.7	7	102	1.6	56	15	11	1100mm800mm1000mm	500
	0.8	8	116	1.5	53
	1	10	145	1.3	46
OF-15A	0.8	8	116	1.8	64	20	15	1130mm900mm1571mm	550
OF-18.5A	0.7	7	102	3.1	109	25	18.5	1400mm1000mm1200mm	600
	0.8	8	116	2.8	99
	1	10	145	2.5	88
OF-22A	0.7	7	102	3.7	131	30	22	1400mm1000mm1200mm	655
	0.8	8	116	3.4	120
	1	10	145	3	106
OF-30A	0.7	7	102	5.2	184	41	30	1920mm1170mm1320mm	1150
	0.8	8	116	4.7	166
	1	10	145	4.3	152
OF-37A	0.7	7	102	6.1	215	50	37	1920mm1170mm1320mm	1200
	0.8	8	116	5.6	198
	1	10	145	5	177
OF-45A	0.7	7	102	7.5	265	61	45	1920mm1170mm1320mm	1320
	0.8	8	116	6.8	240
	1	10	145	6	212
OF-55A	0.7	7	102	10	353	75	55	1930mm1320mm1535mm	1520
	0.8	8	116	9	318
	1	10	145	7.8	275
OF-75A	0.7	7	102	13	459	102	75	1930mm1320mm1535mm	1620
	0.8	8	116	12	424
	1	10	145	10	353
OF-90A	0.7	7	102	15.5	547	122	90	1930mm1320mm1535mm	1800
	0.8	8	116	14	494
	1	10	145	12.5	441
OF-110A	0.7	7	102	20	706	150	110	2150mm1600mm1680mm	3100
	0.8	8	116	18	636
	1	10	145	16	565
OF-132A	0.7	7	102	25	883	179	132	2150mm1600mm1680mm	3250
	0.8	8	116	23	812
	1	10	145	20	706
OF-160W	0.7	7	102	27	953	217	160	2860mm1500mm1750mm	4500
	0.8	8	116	25.5	900
	1	10	145	24	847
OF-185W	0.7	7	102	30	1059	251	185	2860mm1500mm1750mm	4500
	0.8	8	116	28	989
	1	10	145	25	883
OF-200W	0.7	7	102	36	1271	272	200	2860mm1500mm1750mm	4500
	0.8	8	116	33	1165
	1	10	145	27	953

*For more model,please contact the salesman person.

Packaging & Shipping

Company Profile

Certifications

FAQ

Are you manufacturer?
ZIQI: Yes,we are professional air compressor manufacturer over 10 years and our factory located in ZheJiang .
How long is your air compressor warranty?
ZIQI: For 1 year.
Do you provide After- sales service parts?
ZIQI: Of course, We could provide easy- consumable spares.
How long could your air compressor be used?
ZIQI: Generally, more than 10 years.
How about your price?
ZIQI: Based on high quality, Our price is very competitive in this market all over the world.
How about your customer service?
ZIQI: For email, we could reply our customers’ emails within 2 hours.
Do you support OEM?
ZIQI: YES, and we also provide multiple models to select.

How to get quicker quotation?

When you send us inquiry, please confirm below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.
This information is helpful for us to check suitable equipment solution and quotation quickly.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Technical Support
Warranty:	2 Years
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

1. Pneumatic Tools and Equipment:

2. Automation and Control Systems:

3. Air Blowing and Cleaning:

4. Air Separation and Gas Generation:

5. HVAC Systems:

6. Air Compression for Storage and Transport:

7. Process Instrumentation:

8. Material Handling and Pneumatic Conveying:

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.

2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.

3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.

4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.

5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.

6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.

7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.

8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.

9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.

These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.

China manufacturer Water Lubricant Silent Rotary Screw Type 132kw 200HP Air Cooling 116psi 7bar/8bar/10bar Air Compressor for Oxygen Plant/Textile Industry air compressor for sale
editor by CX 2024-02-15

China OEM High Quality Air Compressor Csbn373h8d Air Conditioning Compressor Cold Room for Sale portable air compressor

Product Description

Shipping

1.If the quantity of order is not very big,we could send them to you by express delivery,such as TNT,DHL,UPS or EMS etc.
2.If order is big,we will advise you use Air shipping or sea shipping through your nomiated forwarder agent .Our long -term cooperated agent also availabe.

Our products

Our advantages:

1. Low noise and low vibration

2. CHINAMFG compressors have a CHINAMFG cast iron body to provide a large heat dissipation area to improve the cooling effect of the compressor, and use light-weight Lu pistons to reduce friction and vibration, and have a cutting-edge electronic protective film to provide comprehensive motor protection.

Product Features

Excellent Low temperature performance ,high efficiency and energy saving (high volumetric efficiency):In medium and low temperature applications.the volumetric efficiency is more than 30% higher than that of traditional piston machines.

Smooth operation ,Low noise and vibration,reducing the impact on the environment.the scroll compressor has a novel and precise structure,and has the advantages of small size,low noise,light weight ,small vibration,low energy consumption,long life ,continuous and stable gas transmission, reliabel operation,and clean gas source,etc.

the unique design of the scroll compressor makes it on energy-saving compressor in the world today.the main operating part of the scroll compressor is the scroll.which is only dirty and has no wear,so it has a long life,and is known as a maintenance -free compressor.

Technical Datas

Model	Power (HP)	Exhaust cpacity M3/h	Air condition(7.2/54.4C)		Weight( Kg)	Height (mm)
			Refrigeration	Input power (W)
			Capacity( W)	Input power (W)
Single phase
ZR16K3-PFJ	1.33	3.97	4571	1320	25.9	370.4
ZR18K3-PFJ	1.5	4.37	4400	1440	25.9	370.4
ZR20K3-PFJ	1.69	4.76	4890	1600	25.9	370.4
ZR22K3-PFJ	1.83	5.34	5330	1730	25.9	382.8
ZR24K3-PFJ	2	5.92	5920	1870	26.3	382.8
ZR26K3-PFJ	2.17	6.27	6330	2000	25.9	382.8
ZR28K3-PFJ	2.33	6.83	6910	2150	27.2	382.8
ZR30K3-PFJ	2.5	7.3	7380	2290	28.5	405.5
ZR32K3-PFJ	2.67	7.55	7760	2410	28.1	405.5
ZR34K3-PFJ	2.83	8.02	8200	2520	29.5	405.5
ZR36K3-PFJ	3	8.61	8790	2700	29.5	405.5
ZR40K3-PFJ	3.33	9.43	9670	2970	29.9	419.3

FAQ

1. Q: Are you a manufacturer?
A:A: Yes, we are manufacturer. Non-standard customization and OEM service are both welcomed and available.
2.Q: Can I get the warranty?
A: Yes, under the condition that the user apply the equipment correctly, we provide 1 year quality warranty.
3.Q: How to pay?
A: 30% of total amount to be paid before production, and the balance payment before shipment.
4.Q: How to ship?
A: We work with experienced shipping agent who could arrange your delivery on the cheapest and fastest way. Our closest port is HangZhou/ZheJiang .
5.Q: What about the delivery date?
A: 10-30 days, depends on the order.
6.Q: What about the maintenance?
A: All the products are tested before shipment, and maintenance is easy. We provide patient pre-sale service and considerate after-sale service.
7.Q: Do you have any Certificate?
A: Yes. we have ISO9001 certificate. If you need any other Certificate, we can help you to get it.
8.Q: Can I get guarantee of products?
A: Yes, every cold room is 10 years quality warrantee under customer correct using the products.
9.Q:How long is the lead time?
A:Usually for units we need 35 days to produce. If it is a special voltage of 60hz, the production time needs to be extended by 5-10 days. Panels and other things usually we need 7-20 days depends on amount.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	1 Year
Installation Type:	Stationary Type

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

What are the environmental considerations when using air compressors?

When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:

Energy Efficiency:

Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.

Air Leakage:

Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.

Noise Pollution:

Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.

Emissions:

While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.

Proper Waste Management:

Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.

Sustainable Practices:

Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.

By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China OEM High Quality Air Compressor Csbn373h8d Air Conditioning Compressor Cold Room for Sale portable air compressor
editor by CX 2024-02-04

China wholesaler Portable Compressor, 1.5HP, 6L Oil Free Piston Air Compressor air compressor for sale

Product Description

Detailed Photos

Product Parameters

Model	TAT-2006	Power(HP)	1.5HP
Noise(db)	67	Max Pressure	8.8BAR
Rovolution	2800RPM	Tank(L/GAL)	6 / 1.6
Max delivery	193L/Min	N.W. (KG)	15.8
Packing (mm)	385370355	G.W. (KG)	16.8

Product featured:

1.Integrated control panel easy for operation

2.Strong handle for easy carry
3.Strong rubber feet for stable running
4.Whole plastic cover will be more quieter
5.2pole industrial motor with 2xlonger life time

Certifications

Company Profile

HangZhou AXIHU (WEST LAKE) DIS. Mechanical and Electrical Industry Co., Ltd Established in 2009, we are a compressor manufacture and specialized in silent air compressor over 12 years. Our company has passed ISO9001 quality management system certification and has Chinese air compressor professional production license. “AXIHU (WEST LAKE) DIS.” is our registered trademark.
AXIHU (WEST LAKE) DIS. company has completed hardware facilities, standard laboratory testing equipment, and normal production and quality control Procedures. It has developed more than 1 hundred kinds of models with advanced compressor professional engineers and technicians. In addition of the product certification of CE. ETL. SGS, it also has the ability to develop products and market independently, which can meet the needs of different requires of customers. There are a large number of products have been sold to Japan, the United States, Australia, Europe, South America and southeast Asia.
HangZhou AXIHU (WEST LAKE) DIS. company will have the global market in view and adhere to the concept of manufacturing quality products, carrying through the first-class service and creating the best prestige. We are sincerely looking CHINAMFG to cooperation with all friends home and abroad, and develop the market to create a CHINAMFG situation.

Our Advantages

FAQ

Q1: Are you the manufacturer or trading company?
A1: We are the manufacturer.

Q2: Where is your factory?
A2: It is very close to ZheJiang , located in HangZhou City, ZheJiang Province, China.

Q3: What’s the terms of trade?
A3: FOB,CFR and CIF are all acceptable.

Q4: What’s the terms of payment?
A4: T/T, L/C or cash.

Q5: How long is your delivery time?
A5: Generally it is 30-50 days if the goods are not in stock, it is according to quantity.

Q6: What is the advantage about your company?
A6: Our company has professional team and professional production line.

Q7: If we travel to China to checking your facility, are you welcome?
A7: Of course, why not? We will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport. Warm Welcome!

Q8: How Many Years of your company working in this industry?
A8: We have 12-year experience in this field.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	1 Year Limited Warranty
Warranty:	1 Year Limited Warranty
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type

Samples:	US$ 150/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

China wholesaler Portable Compressor, 1.5HP, 6L Oil Free Piston Air Compressor air compressor for sale
editor by CX 2024-01-22

China best Great 400kw 530HP Water Lubricated Oil-Free Single Screw Air Compressor air compressor for sale

Product Description

GREAT 400kw 530hp Water Lubricated Oil-Free Single Screw Air Compressor

1.About GREAT:

GREAT air compressor, as 1 leading manufacture &exporter for screw air compressor in China. Founded in 1957 years, coving 20000 square meters. With over 200 skilled employees and 20 R&D research engineers, we focus on the research, production, sales and service for screw air compressor and relative products .Our goal is to provide the high grade and most energy saving compressor for the world customer.
Our main products including screw air compressor, air dryer, air tanker, line filters and other relative compressed air products etc. we passed ISO and CE certificate. Germany standard and 60 years industry experience help us win the domestic and foreign customers praise .From 2016 opened to the world, now exporting to more than 100 countries. We have established a huge sales and service network at home and abroad. We can provide satisfied service such as consulting, training, repairing, spare parts suppling, etc.
“GREAT” as famous china brand for air compressor, our mission is to become a world-famous high-end brand and service for oversea customers. Welcome more oversea agents, dealers and distributors to join us. We also can do the OEM service for big customers
Accoring to the busniness tenet of “high efficiency,engeryg saving, realiability and durable ” GREAT provide you with high-quality products and timely service as well as customized compressed air system solutions.

2. performance characteristics for water- lubricated oil free screw air compressor :

3. Advantages for oil-free water lubrication screw air compressor:

1). No oil, cleaner
The whole air compressor does not need to add any lubricating oil inside to make the outlet gas cleaner.
2). Stainless steel, safer
The parts in contact with compressed air in the system are made of 304 or 316 stainless steel to prevent pollution in the compression process and ensure the safety of gas.
3). low speed, high efficiency, more environmental protection
The main engine and motor are connected by elastic coupling, and there is no gearbox and other variable speed device, which makes the main engine and motor rotate at the same speed, reducing noise and vibration less.
The compression temperature of the host machine is about 50ºC, close to isothermal compression, effectively reducing energy consumption.
Using water as a lubricant, the entire life cycle of the equipment does not produce any waste oil discharge.

4).Simple structure and low maintenance cost

The machine structure is simple, easy to maintain, only need to replace the air rate and water filter element, no lubricating oil, greatly reduce the maintenance cost.

4. Details for GREAT oil free water lubricated screw air compressor :

5.Technical Parameters for oil-free water lubrication screw air compressor:

Model	Max work pressure (Mpa)	Flow air capacity (m³/min)	Motor power (kw)	Noise (dB)	Pipe dia. Of cooling water	Cooling water volume (T/H)	Lubricate water volume	Dimension LXWXH (mm)	Weight (kg)	Air outlet
TKW-5VA/W	0.8	0.3~0.78	5.5	58	3/4″	1.5	10	800x800x1100	460	3/4″
	1.0	0.2~0.65
TKW-7VA/W	0.8	0.35~1.17	7.5	58	3/4″	1.5	10	800x800x1100	510	3/4″
	1.0	0.3~1.05
	1.25	0.24~0.81
TKW-11VA/W	0.8	0.54~1.65	11	60	1″	2.5	26	1200x760x1300	620	3/4″
	1.0	0.45~1.42
	1.25	0.35~1.10
TKW-15VA/W	0.8	0.75~2.43	15	63	1″	3.5	26	1200x760x1300	670	3/4″
	1.0	0.65~2.17
	1.25	0.6~1.80
TKW-18VA/W	0.8	0.9~3.13	18.5	65	1″	4	30	1400x900x1450	730	1″
	1.0	0.9~2.82
	1.25	0.6~2.05
TKW-22VA/W	0.8	1.1~3.52	22	65	1″	5	30	1400x900x1450	780	1″
	1.0	0.97~3.21
	1.25	0.85~2.78
TKW-30VA/W	0.8	1.55~5.12	30	67	1 1/2″	7	40	1550X1150X1500(A) 1500X1150X1300(W)	1150	1 1/4″
	1.0	1.255~4.43
	1.25	1.1~3.63
TKW-37VA/W	0.8	1.91~6.30	37	67	1 1/2″	9	40	1550X1150X1500(A) 1500X1150X1300(W)	1200	1 1/4″
	1.0	1.60~5.33
	1.25	1.42~4.77
TKW-45VW	0.8	2.5~7.4	45	68	1 1/2″	10	90	1800x1300x1750(A) 1800x1300x1680(W)	1490	2″
	1.0	1.91~6.30
	1.25	1.70~5.56
TKW-55VW	0.8	3.0~9.76	55	70	1 1/2″	12	100	1980x1300x1750(A) 1800x1300x1680(W)	1570	2″
	1.0	2.60~8.55
	1.25	2.30~7.67
TKW-75VW	0.8	3.95~13.00	75	73	1 1/2″	18	100	1800x1300x1750(W)	1750	2″
	1.0	3.4~11.50
	1.25	3.0~9.70
TKW-90VW	0.8	5.0~14.8	90	73	1 1 /2″	20	120	2200x1550x1800	2450	2 1/2″
	1.0	4.30~13.90
	1.25	3.72~12.60
TKW-110VW	0.8	6.0~19.85	110	78	2″	24	120	2200x1550x1800	2580	2 1/2″
	1.0	5.0~16.66
	1.25	4.65~15.56
TKW-132VW	0.8	6.75~23.10	132	78	2″	30	120	2200x1550X1800	2700	2 1/2″
	1.0	6.0~19.97
	1.25	5.07~16.90
TKW-160VW	0.8	8.5~28.11	160	80	3″	35	160	3000X1800X2100	3900	3″
	1.0	7.6~25.45
	1.25	6.7~22.52
TKW-185VW	0.8	10~33.97	185	80	3″	38	160	3000X1800X2100	4050	3″
	1.0	8.72~29.00
	1.25	7.75~25.21
TKW-200VW	0.8	11.2~36.75	200	80	4″	42	200	3100X1850X2100	4200	4″
	1.0	9.68~32.78
	1.25	9.2~29.24
TKW-220VW	0.8	12.2~39.67	220	80	4″	47	200	3100X1850X2100	4400	4″
	1.0	11.2~36.75
	1.25	9.0~29.63
TKW-250VW	0.8	13.5~43.5	250	80	4″	53	200	3100X1850X2100	4800	4″
	1.0	12.2~39.30
	1.25	10.2~34

4.Application :

6.Certification :

7. Packing and shipping :

8. FAQ Industrial Lubricated High Pressure Screw Air Compressor
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!

9. Contact :

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Water Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How Do Water-Lubricated Air Compressors Contribute to Energy Savings?

Water-lubricated air compressors can contribute to energy savings in several ways, making them an attractive option for industries looking to optimize their energy consumption. Here are the key ways in which water-lubricated compressors help achieve energy efficiency:

Reduced friction and improved efficiency: Water serves as a lubricant in water-lubricated compressors, creating a thin film between moving parts to reduce friction. This reduces the energy losses due to mechanical friction and improves the overall efficiency of the compressor. Compared to oil-lubricated compressors, water-lubricated models can achieve higher mechanical efficiency, translating into energy savings over the compressor’s operational lifetime.
Elimination of oil vapor carryover: Oil-lubricated compressors require oil filtration systems to prevent oil carryover into the compressed air stream. These filtration systems consume energy and can introduce pressure drops. In contrast, water-lubricated compressors eliminate the need for oil filtration, reducing energy consumption associated with filtration equipment and minimizing pressure losses. This leads to improved system efficiency and energy savings.
Improved heat transfer and cooling: Water-lubricated compressors offer enhanced heat transfer capabilities compared to oil-lubricated counterparts. Water has a higher specific heat capacity and thermal conductivity, allowing for more efficient heat dissipation. This results in lower operating temperatures and reduces the energy required for cooling the compressor. By optimizing heat transfer, water-lubricated compressors can minimize energy consumption associated with cooling systems or air conditioning in compressor rooms.
Optimized system design: Water-lubricated compressors often employ advanced system designs that further enhance energy efficiency. For example, they may incorporate variable speed drive (VSD) technology, which adjusts the compressor’s speed and power consumption based on the actual air demand. This eliminates energy waste associated with constant-speed operation and reduces energy consumption during periods of low compressed air demand. Additionally, water-lubricated compressors may feature optimized internal components and improved air flow dynamics, resulting in reduced energy losses and improved overall system efficiency.
Heat recovery opportunities: Water-lubricated compressors can provide opportunities for heat recovery. The heat generated during compression can be captured and utilized for various heating applications within the facility, such as space heating, water heating, or process heating. By harnessing this waste heat, water-lubricated compressors contribute to energy savings by offsetting the need for additional energy sources for heating purposes.

By combining these energy-saving features, water-lubricated air compressors help optimize energy consumption, reduce operational costs, and minimize the environmental impact associated with compressed air systems. Implementing water-lubricated compressors with a comprehensive energy management strategy can result in significant energy savings and improved overall sustainability for industrial operations.

air compressor

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

When comparing water-lubricated air compressors to other types of compressors, there are several factors that can influence the maintenance costs. Here’s a detailed explanation of how water-lubricated air compressors compare in terms of maintenance costs:

Initial Investment:

Higher Initial Cost: Water-lubricated air compressors tend to have a higher initial cost compared to oil-lubricated compressors. This is primarily due to the additional components required for the water-lubrication system, such as water pumps, filters, and separators. The higher initial investment can impact the overall cost of the compressor system.

Lubrication System Maintenance:

Water Treatment and Filtration: Water-lubricated compressors may require additional maintenance for water treatment and filtration systems. Regular monitoring, maintenance, and replacement of filters or treatment media are necessary to ensure the water quality remains suitable for lubrication. The cost of water treatment and filtration maintenance should be considered in the overall maintenance costs.
Water Quality Monitoring: Monitoring the quality of the water used in water-lubricated compressors is crucial. This may involve periodic water analysis, temperature monitoring, and water chemistry checks. The cost of water quality monitoring should be factored into the maintenance costs.

Component Lifespan and Replacement:

Extended Component Lifespan: Proper water-lubrication and cooling can contribute to the extended lifespan of compressor components. Reduced friction, effective cooling, and contaminant control can minimize wear and damage to components, leading to lower replacement costs over time. Water-lubricated compressors may have advantages in terms of component longevity, potentially reducing the frequency of component replacements.

Corrosion Prevention:

Corrosion Protection Measures: Water-lubricated compressors require corrosion prevention measures due to the presence of water within the system. Corrosion-resistant materials, coatings, or regular maintenance procedures are necessary to prevent corrosion-related issues. The cost of implementing and maintaining corrosion protection measures should be considered in the overall maintenance costs.

Overall, the maintenance costs of water-lubricated air compressors can vary depending on factors such as the specific design and components of the compressor, the quality of the water used, the effectiveness of water treatment and filtration systems, and the implementation of corrosion prevention measures. While water-lubricated compressors may have higher initial costs and additional maintenance requirements, they can potentially offer advantages in terms of extended component lifespan, reduced component replacements, and effective lubrication. It is important to consider these factors and consult the manufacturer’s guidelines to accurately assess the maintenance costs associated with water-lubricated air compressors.

air compressor

What Maintenance Is Required for Water-Lubricated Air Compressors?

Maintaining water-lubricated air compressors involves several key maintenance tasks to ensure their optimal performance and longevity. Here are the maintenance requirements typically associated with water-lubricated air compressors:

Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.

Regular and proactive maintenance of water-lubricated air compressors helps ensure their reliable operation, extends their lifespan, and minimizes the risk of performance issues or component failures. It is advisable to consult the compressor’s documentation and seek guidance from the manufacturer or a qualified technician to establish a comprehensive maintenance routine specific to the equipment.

China best Great 400kw 530HP Water Lubricated Oil-Free Single Screw Air Compressor air compressor for sale
editor by CX 2024-01-10