Product Description
Product Description
Industrial Oil free screw air compressor
Main Applications
Oil-free screw air compressors are widely used in industries that require high-quality air sources such as medicine, food, electronics, chemicals, packaging, etc. 100% pure compressed air is a necessary measure to ensure process and product quality, and high-end products that can be produced risk-free and safely.
The lubrication system in oil-free screw air compressors is a separated oil supply circulation unit, the compression chamber and the bearing are tightly separated by a high-performance mechanical seal assembly. The lubricating oil can only flow in the enclosed area and cannot enter the compression chamber. The compressed room is pure air that is not contained. After a little treatment of water and dust removal, 100% pure compressed air can be obtained.
The oil-free screw air compressor compresses the air through a two-stage screw rotor, and removes the water in the compressed air through a water-gas separator. At the same time, because there is no spread oil cooling, a pre-cooler, intercooler, and after-cooler are generally configured to cool the compressed air to reach the required exhaust temperature. A shaft seal with excellent performance is used on the shaft of the rotor to prevent lubricating oil from leaking into the compressed air to achieve true oil-free.
The oil-free screw air compressor is a positive displacement gas compression machine with a rotary motion of the working volume. The compression of the gas is achieved by the change of the volume, and the change of the volume is achieved by the rotary motion of a pair of rotors of the air compressor in the casing.
Characteristic:
- The screw main engine, pipes, and parts are all made of corrosion-resistant special stainless steel materials
- Using S-K-F bearings, independent internal air-sealing technology, to ensure that the lubricating water will never contact the bearing, and to maintain the service life of the bearing
- Unique water filtration and lubrication system to ensure good lubrication, sealing, noise reduction and cooling functions
- 100% pure and oil-free, 100% oil-free compression system, low noise, super energy saving;
- Environmental protection and high efficiency: Since there is no lubricating oil, there is no oil pollution; the high-precision water filter ensures that the lubricating water maintains clean quality.
- Ideal isothermal compression: Since the cooling performance of water is much higher than air compressor oil’ s cooling performance, the operating temperature of the oil-free screw air compressor is only 40°C, which is close to the suction temperature, achieving high-efficiency ideal isothermal compression.
- Reliable and user-friendly design, reasonable layout, simple and fast service channel, easy maintenance or fault repair
- The back end of the air compressor can be equipped with supporting equipment and systems such as refrigerated CHINAMFG dryer, adsorption dryers, precision filters, gas storage tanks, etc.
- The air compressor can choose the gas output of 1-60m³/min, the pressure is 7bar
- 0.1m³~100m³ gas storage tanks of more than 200 specifications with different volumes
- Flaw detection, water pressure test, 100% non-destructive test for the butt weld seam of the gas storage tank
- The best energy-saving working conditions can be set according to dew point requirements, inlet flow, pressure, and temperature
Product Parameters
Performance Features
- The conventional process flow of the air compressor system: air compressor → gas storage tank → precision filter → refrigerated dryer → adsorption dryer → precision filter → precision filter → activated carbon filter → gas storage tank
- The air compressor can be driven by fixed frequency or variable frequency, with precise control, saving at least 30% of energy consumption
- The air compressor can realize remote real-time monitoring and intelligent maintenance
- The air compressor can adopt a touch screen intelligent controller with powerful control and communication functions
- The screw main engine uses three-wire meshing, non-equal width tooth technology, meshing pair water film contact, no wear, good force balance
Company Profile
Our Advantages
Certifications
Packaging & Shipping
| After-sales Service: | Field Installation, Commissioning and Training |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
| Samples: |
US$ 7500/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?
Water-lubricated air compressors can have an impact on the quality of the compressed air they produce. Here’s a detailed explanation of how water-lubricated air compressors can affect compressed air quality:
Moisture Content:
- Condensation: Water-lubricated compressors introduce moisture into the compressed air system. During the compression process, as the air cools downstream, moisture can condense and accumulate. This moisture can lead to issues such as corrosion, rust, and contamination of downstream equipment or processes.
- Water Carryover: If the compressor’s water separation mechanisms are not efficient or if there are malfunctions in the water removal systems, water droplets or mist may carry over into the compressed air. This can negatively impact the quality of the compressed air and introduce moisture-related issues downstream.
Contamination:
- Oil Contamination: In some water-lubricated compressors, there is a potential for oil to mix with the water used for lubrication. If oil and water emulsify or if there are leaks in the compressor system, oil contamination may occur. Oil-contaminated compressed air can have adverse effects on downstream processes, equipment, and products. It can lead to contamination, reduced performance of pneumatic components, and potential health and safety concerns.
- Particulate Contamination: Water-lubricated compressors can introduce particulate matter, such as sediment, debris, or rust, into the compressed air system. This can occur if the water supply or water treatment systems are not adequately filtered or maintained. Particulate contamination can clog or damage pneumatic equipment, affect product quality, and cause operational issues in downstream applications.
Preventive Measures:
- Water Separation: Water-lubricated compressors employ various water separation mechanisms to remove moisture from the compressed air. This includes moisture separators, water traps, or coalescing filters that are specifically designed to capture and remove water droplets or mist from the compressed air stream. Regular maintenance and inspection of these separation systems are necessary to ensure their proper functioning.
- Air Treatment: Additional air treatment components, such as air dryers or desiccant systems, can be installed downstream of water-lubricated compressors to further reduce moisture content in the compressed air. These systems help to remove moisture that may have carried over from the compressor and ensure that the compressed air meets the required dryness standards for specific applications.
- Proper Maintenance: Regular maintenance of water-lubricated compressors is essential to minimize the potential impact on compressed air quality. This includes routine inspection, cleaning, and replacement of filters, lubrication systems, and water separation components. Addressing any leaks, malfunctioning components, or system issues promptly can help maintain the integrity of the compressed air and prevent contamination or excessive moisture levels.
By implementing appropriate water separation mechanisms, air treatment systems, and maintenance practices, the impact of water-lubricated air compressors on compressed air quality can be minimized. It is important to consider the specific requirements of the application and follow industry standards and guidelines to ensure the desired compressed air quality is achieved.
.webp)
Are There Any Potential Water-Related Issues with These Compressors?
Yes, there are potential water-related issues that can arise with water-lubricated compressors. Here’s a detailed explanation of some of the common water-related issues associated with these compressors:
Corrosion:
- Internal Corrosion: Water-lubricated compressors are susceptible to internal corrosion due to the presence of water within the system. If the water used is not properly treated or if corrosion prevention measures are insufficient, the internal components of the compressor can corrode over time. Corrosion can lead to reduced performance, component damage, and the potential for leaks or system failures.
- External Corrosion: External components such as piping, valves, and fittings can also be affected by corrosion if exposed to water and moisture. Corrosion on these external surfaces can lead to compromised integrity, leaks, and reduced system efficiency.
Water Quality:
- Water Contaminants: The quality of the water used in water-lubricated compressors is crucial. If the water contains contaminants such as sediment, debris, oil, or chemicals, it can negatively impact the performance and reliability of the compressor. Contaminants can cause blockages, clogging, increased wear on components, reduced lubrication effectiveness, and potential damage to the compressor.
- Water Hardness: Water hardness, characterized by high mineral content, can lead to scaling and deposits within the compressor and associated components. Scaling can restrict flow, impede heat transfer, and reduce the efficiency of the compressor. It can also contribute to fouling and corrosion issues.
Water Treatment and Filtration:
- Inadequate Water Treatment: Insufficient or improper water treatment can lead to various issues. If the water is not adequately treated for contaminants, hardness, or pH levels, it can result in accelerated corrosion, scaling, fouling, and reduced lubrication effectiveness. Inadequate water treatment can also contribute to increased maintenance requirements and decreased overall compressor performance.
- Filtration System Issues: Filtration systems play a crucial role in removing contaminants from the water. However, if the filtration system is not properly maintained, filters become clogged or damaged, or if there are design or installation issues, it can lead to inadequate filtration and compromised water quality. This can result in the accumulation of contaminants, reduced lubrication performance, and potential damage to the compressor.
Water Supply and Availability:
- Insufficient Water Supply: Water-lubricated compressors rely on a consistent and reliable water supply. If the water supply is insufficient in terms of flow rate, pressure, or quality, it can impact the compressor’s operation and performance. Inadequate water supply can lead to inadequate lubrication, reduced cooling capacity, and increased wear on components.
- Water Source Availability: The availability of a suitable water source is essential for water-lubricated compressors. In certain locations or applications, accessing clean water or meeting specific water quality requirements may pose challenges. Lack of a suitable water source can limit the feasibility or effectiveness of using water-lubricated compressors.
It is important to address these potential water-related issues by implementing proper water treatment, corrosion prevention measures, regular maintenance of filtration systems, and monitoring of water quality. Adhering to manufacturer guidelines, performing regular inspections, and taking proactive measures can help mitigate these issues and ensure the reliable and efficient operation of water-lubricated compressors.
.webp)
What Maintenance Is Required for Water-Lubricated Air Compressors?
Maintaining water-lubricated air compressors involves several key maintenance tasks to ensure their optimal performance and longevity. Here are the maintenance requirements typically associated with water-lubricated air compressors:
- Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
- Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
- Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
- Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
- Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
- Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
- Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.
Regular and proactive maintenance of water-lubricated air compressors helps ensure their reliable operation, extends their lifespan, and minimizes the risk of performance issues or component failures. It is advisable to consult the compressor’s documentation and seek guidance from the manufacturer or a qualified technician to establish a comprehensive maintenance routine specific to the equipment.
editor by CX 2023-11-21